Mobil Gylgoyle 460

 

www.patrakiumbara.com

 

 

Mobil Glygoyle 460

Mobil Glygoyle lubricants are supreme performance oils for gears, bearings and compressors, designed to provide outstanding efficiency, equipment protection and oil life. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed to operate beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low temperature fluidity. The ISO 150 to 1000 grades are approved for USDA/NSF H-1 food-grade use.
Advantages and Potential Benefits:
• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures, especially important for successful operation of remotely located equipment
• Excellent protection of gears, even under heavy loads
Applications:
• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• All worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers
• Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries
• Plastic calendars
• Gas compression utilising reciprocation, rotary, screw, and centrifugal type compressors

Mobilgrease XHP 220

Mobilgrease XHP 220

Manufacturer:	MOBIL
Brand Name:	Mobilgrease
Soap/Thickener:	Lithium Complex
NLGI Grade:	O
Application:	see below
Oil Viscosity cSt at 40°C: (Kinematic)	220
Oil Viscosity cSt at 100°C: (Kinematic)	unavailable
Dropping Point °C:	270
Max Op Temp °C:	140
Min Op Temp °C:	unavailable
Color:	blue
Worked Penetration:	370
Timken OK Load lb:	40
Extreme Pressure:	yes
Food Grade (NSF H1):	no

Mobilgrease XHP 220 greases are extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting edge, proprietary, lithium complex manufacturing technology. They are formulated to provide excellent high temperature performance with superb adhesion, structural stability and resistance to water contamination. These greases have a high level of chemical stability and offer excellent protection against rust and corrosion. These greases feature high dropping points and maximum recommended operating temperature of 140° C (284°F). Mobilgrease XHP 220 greases are available in NLGI grades 00, 0, 1, 2 and 3 with an ISO VG 220 base oil viscosity. Mobilgrease XHP 220 greases are designed for a wide range of applications including the industrial, automotive, construction and marine sectors. Their performance features make them ideal choices for operating conditions including high temperature, water contamination, shock loading and extended re-lubrication operations. Mobilgrease XHP 222 Special is an extreme pressure grease containing molybdenum disulfide that provides protection from wear under conditions pivoting and other conditions that lead to loss of oil film. Mobilgrease XHP 220 greases are leading members of the Mobilgrease brand of products, which have gained a reputation world-wide for innovation and performance excellence.Mobilgrease XHP 220 greases are state-of-the-art products designed by our formulation technologists and backed by our world-wide technical support staff. A key factor in the excellent adhesion and cohesion properties and high drop point of Mobilgrease XHP 220 greases is the proprietary manufacturing technology developed at our research facilities and adopted by our modern manufacturing facilities. These products use specially selected additives to provide excellent oxidation stability, rust and corrosion control, resistance to water contamination as well as anti-wear and EP protection.

Applications: Mobilgrease XHP 220 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. Their blue color enables easy verification of application: Mobilgrease XHP 005 and 220 are softer, high-temperature greases recommended for centralized grease application systems, gear lubrication, and where extreme-cold-temperature pumpability is important.

UNIREX N 3

UNIREX N 3

Manufacturer:	MOBIL
Brand Name:	Unirex
Soap/Thickener:	Lithium
NLGI Grade:	3
Application:	see below
Oil Viscosity cSt at 40°C: (Kinematic)	115
Oil Viscosity cSt at 100°C: (Kinematic)	unavailable
Dropping Point °C:	230
Max Op Temp °C:	175
Min Op Temp °C:	unavailable
Color:	green
Worked Penetration:	235
Timken OK Load lb:	unavailable
Extreme Pressure:	yes
Food Grade (NSF H1):	no

UNIREX N greases are premium-quality, lithium-complex products suitable for high-temperature service in rolling-element bearings. These versatile greases can be used in a wide range of industrial applications and are particularly recommended for electric-motor lubrication. Unirex N 2 in an NLGI No. 2 grade and is preferred in most cases for application by hand packing or by grease gun. UNIREX N 3 is an NLGI No. 3 grade often used for special applications such as sealed-for-life electric motor bearings, vertically mounted bearings, and higher-speed applications. UNIREX N greases are not intended to be used under extreme pressure conditions where extra anti-welding properties are required. UNIREX N 2 meets the requirements of Lubricating Grease DIN 51825 - K2N - 20L and ISO L-XBDHA 2. UNIREX N 3 meets the requirements of Lubricating Grease DIN 51825 - K3N - 20L and ISO L-XBDHA 3. Unirex N greases exhibit excellent high and low temperature performance, resistance to water and corrosion, and long service life in a range of bearing applications.

Applications: Because of their outstanding oxidation stability and resistance to softening at high temperatures, UNIREX N greases may be used in many applications such as oven-conveyor bearings, dryer-roller bearings, rotary steam joints, kiln-car bearings, induced-draft fan bearings, and equipment adjacent to high radiant heat such as ovens, soaking pits, etc. UNIREX N 2 is an NLGI No. 2 grade and is preferred in most cases for application by hand-packing or by grease gun. UNIREX N 2 is recommended for the lubrication of electric motors. It is suitable for NEMA (National Electric Manufacturer's Association) Insulation Class A, B, and F motors. UNIREX N 3 is an NLGI No. 3 grade and is used for special applications such as sealed-for-life bearings, vertically-mounted bearings, and higher-speed bearings. Most of the uses for UNIREX N involve manual methods of application. Although UNIREX N 2 is suitable for use in automatic centralized systems, equipment served by these systems would normally not require the long-life properties of UNIREX N, since one of the functions of automatic systems is to replenish the lubricant at relatively short time intervals. UNIREX N 3 should not be used in such systems. Regardless of the level of oxidation stability of a grease, an increase in temperature will affect the rate of oxidation and thermal deterioration. Consequently, more frequent relubrication is required at higher temperatures. For UNIREX N greases, it is recommended that relubrication intervals not exceed one week of continuous service at 175°C. As temperatures approach 190°C, relubrication intervals should be daily or every shift. Relubrication intervals will, of course, vary widely with the type of service and should be based primarily on the recommendations of the motor manufacturer.

Unirex N 2

Unirex N 2

Manufacturer:	MOBIL
Brand Name:	Unirex
Soap/Thickener:	Lithium
NLGI Grade:	2
Application:	see below
Oil Viscosity cSt at 40°C: (Kinematic)	115
Oil Viscosity cSt at 100°C: (Kinematic)	unavailable
Dropping Point °C:	230
Max Op Temp °C:	175
Min Op Temp °C:	unavailable
Color:	green
Worked Penetration:	280
Timken OK Load lb:	unavailable
Extreme Pressure:	yes
Food Grade (NSF H1):	no

UNIREX N greases are premium-quality, lithium-complex products suitable for high-temperature service in rolling-element bearings. These versatile greases can be used in a wide range of industrial applications and are particularly recommended for electric-motor lubrication. Unirex N 2 in an NLGI No. 2 grade and is preferred in most cases for application by hand packing or by grease gun. UNIREX N 3 is an NLGI No. 3 grade often used for special applications such as sealed-for-life electric motor bearings, vertically mounted bearings, and higher-speed applications. UNIREX N greases are not intended to be used under extreme pressure conditions where extra anti-welding properties are required. UNIREX N 2 meets the requirements of Lubricating Grease DIN 51825 - K2N - 20L and ISO L-XBDHA 2. UNIREX N 3 meets the requirements of Lubricating Grease DIN 51825 - K3N - 20L and ISO L-XBDHA 3. Unirex N greases exhibit excellent high and low temperature performance, resistance to water and corrosion, and long service life in a range of bearing applications.

Applications: Because of their outstanding oxidation stability and resistance to softening at high temperatures, UNIREX N greases may be used in many applications such as oven-conveyor bearings, dryer-roller bearings, rotary steam joints, kiln-car bearings, induced-draft fan bearings, and equipment adjacent to high radiant heat such as ovens, soaking pits, etc. UNIREX N 2 is an NLGI No. 2 grade and is preferred in most cases for application by hand-packing or by grease gun. UNIREX N 2 is recommended for the lubrication of electric motors. It is suitable for NEMA (National Electric Manufacturer's Association) Insulation Class A, B, and F motors. UNIREX N 3 is an NLGI No. 3 grade and is used for special applications such as sealed-for-life bearings, vertically-mounted bearings, and higher-speed bearings. Most of the uses for UNIREX N involve manual methods of application. Although UNIREX N 2 is suitable for use in automatic centralized systems, equipment served by these systems would normally not require the long-life properties of UNIREX N, since one of the functions of automatic systems is to replenish the lubricant at relatively short time intervals. UNIREX N 3 should not be used in such systems. Regardless of the level of oxidation stability of a grease, an increase in temperature will affect the rate of oxidation and thermal deterioration. Consequently, more frequent relubrication is required at higher temperatures. For UNIREX N greases, it is recommended that relubrication intervals not exceed one week of continuous service at 175°C. As temperatures approach 190°C, relubrication intervals should be daily or every shift. Relubrication intervals will, of course, vary widely with the type of service and should be based primarily on the recommendations of the motor manufacturer.

UNIREX EP 0

UNIREX EP 0

Manufacturer:	Exxon
Brand Name:	Unirex
Soap/Thickener:	Lithium Complex
NLGI Grade:	0.5
Application:	see below
Oil Viscosity cSt at 40°C: (Kinematic)	68
Oil Viscosity cSt at 100°C: (Kinematic)	unavailable
Dropping Point °C:	190
Max Op Temp °C:	110
Min Op Temp °C:	-35
Color:	green
Worked Penetration:	350
Timken OK Load lb:	60
Extreme Pressure:	yes
Food Grade (NSF H1):	no

All UNIREX grades have wide operating anddispensing temperature ranges with specificgrades available for either extremely hot or coldconditions. UNIREX greases provide superior protectionagainst rust and metal corrosion as determinedusing ASTM D1743 and a 24-hour CopperCorrosion test at 100°C. UNIREX greases have good high temperaturestability. This feature significantly extendsgreasing interval requirements. All UNIREX EP greases contain additivescombining extreme pressure resistance and wearprotection under severe shock loadingconditions. See the Timken Load and 4-BallWear/EP data on the Typical Properties table. UNIREX EP 1 and UNIREX EP 2 have highLoad Wear Index and Weld Point characteristicsas determined by ASTM D 2596 and areespecially recommended for the lubrication ofheavy duty ball and roller bearings in shovels,drag lines, and drills for open pit mine service.

Applications: The UNIREX EP* brand represents a line ofextremely versatile, long-life bearing greases.They are well-proven, superb performerssuitable for use in a variety of industrialapplications. They offer the following featuresand benefits: Each of the seven grades is formulatedusing an advanced lithium complex soapthickener. Five grades are formulated using leadingedgepolymer enrichment technology.This enhances the already excellentadhesion tendency and water washoutresistance of the product line. Unirex brand greases continue to be thebenchmark against which other premiumquality lithium complex greases arecompared. UNIREX EP 0 grease is formulated for open pitmining operations during the fall and springseasons. The worked penetration of UNIREXEP 0 grease is midway between a NLGI 0 and 1grade. UNIREX EP 0 grease slumps attemperatures as low as -20°C, which enhancesits ability to lubricate at low temperatures.UNIREX EP 0 MOLY provides the sameperformance as UNIREX EP 0 with added solidlubricant for increases extreme pressure loadcarrying ability.

Mobilith SHC 007

Mobilith SHC 007

Manufacturer:	MOBIL
Brand Name:	Mobilith SHC
Soap/Thickener:	Lithium
NLGI Grade:	OO
Application:	see below
Oil Viscosity cSt at 40°C: (Kinematic)	460
Oil Viscosity cSt at 100°C: (Kinematic)	unavailable
Dropping Point °C:	1
Max Op Temp °C:	150
Min Op Temp °C:	-50
Color:	red
Worked Penetration:	415
Timken OK Load lb:	30
Extreme Pressure:	no
Food Grade (NSF H1):	no

Mobilith SHC Series greases are supreme performance products designed for a wide variety of applications at extremes of temperature. They combine the unique features of synthetic base fluids with those of a high quality lithium complex thickener. The wax-free nature of synthetic fluids and the low coefficient of traction (compared with mineral oils), provide excellent low temperature pumpability and very low starting and running torque. These products offer the potential for energy savings and can reduce operating temperatures in the load zone of spherical roller and ball bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The greases have a high level of chemical stability and are formulated with special additive combinations to provide excellent protection against wear, rust and corrosion at high and low temperatures. Mobilith SHC Series greases are available in seven grades, varying in base oil viscosity from ISO VG 100 to 1500 and in NLGI grade from 2 to 00. Mobilith SHC Series greases have become the products of choice for many users, in many industries worldwide. Their reputation is based on their exceptional quality, reliability, versatility and the performance benefits they deliver. The Mobil SHC brand of oils and greases are recognized and appreciated around the world for their innovation and outstanding performance. The Mobilith SHC series symbolizes ExxonMobil's continued commitment to using advanced technology to provide outstanding products. A key factor in the development of the Mobilith SHC Series were the close contacts between our scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that our product offerings would provide exceptional performance in the continually evolving industrial equipment designs. Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of the Mobilith SHC Series lubricants. These benefits include longer grease life, enhanced bearing protection and bearing life, wide temperature range of application, and the potential for improved mechanical efficiency and energy savings. To combat high thermal exposure of the oil our product formulation scientists chose proprietary synthetic base oils for Mobilith SHC Series oils because of their exceptional thermal/oxidative resistance potential. Our scientists developed a state-of-the-art lithium complex thickener technology and used specific additives to enhance the performance of each grade of the Mobilith SHC Series product family.

Applications: While Mobilith SHC Series greases are compatible with most mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobilith SHC Series, it should be thoroughly cleaned out to achieve the maximum performance benefits. While the Mobilith SHC Series greases share many performance benefits, their applications are best described in terms of each product grade: Mobilith SHC 007 is an NLGI 00 Grade / ISO VG 460 grease with a synthetic base fluid; it has a recommended operating temperature range of -50° C to 150 ° C with appropriate relubrication intervals. Its primary uses are in grease filled industrial gear cases subject to high temperatures, where conventional semi fluid greases will not provide acceptable lubricant life and in non-driven heavy-duty truck trailer wheel hubs. *Low temperature claims based on ASTM D 1478 results vs. maximum limits of 10,000 / 1000 gcm @ startup and 1 hour respectively.

Mobilux EP 023

Mobilux EP 023

Manufacturer:	MOBIL
Brand Name:	Mobilux
Soap/Thickener:	Lithium
NLGI Grade:	OOO
Application:	see below
Oil Viscosity cSt at 40°C: (Kinematic)	320
Oil Viscosity cSt at 100°C: (Kinematic)	unavailable
Dropping Point °C:	unavailable
Max Op Temp °C:	120
Min Op Temp °C:	-15
Color:	brown
Worked Penetration:	460
Timken OK Load lb:	40
Extreme Pressure:	yes
Food Grade (NSF H1):	no

Mobilux EP 023 products are a high performance family of five general-purpose industrial greases and two special-duty semi-fluid greases. These lithium hydroxystearate greases are formulated to provide extra protection against wear, rusting and water washout. They are available in NLGI grades ranging in 00 , with base oil viscosities ISO VG 150, 320 and 460. Mobilux EP 023 greases are recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. These greases provide excellent protection against rust and corrosion and resist water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. The recommended operating temperature range is from -20°C to 130°C but they may be used at higher temperatures if the lubrication frequency is increased accordingly. Mobilux EP 023 are particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases they can also be used in many other industrial applications where conventional gear oils cannot be retained in gear cases, chain cases, etc. because of leakage due to worn or missing seals. The recommended operating temperature range is -15° to 120°C for Mobilux EP 023. Features and Benefits: Mobilux EP greases have a long history of proven performance and have demonstrated superior performance versus competitive products in the areas of corrosion protection, low temperature pumpability and high temperature service life. A Timken OK load of 40 lb illustrates their load carrying and extreme pressure capability. Reduced wear under heavy or shock loading and vibration for good equipment reliability and availability Protection against rust and corrosion and resistance to water washout for equipment protection and good lubrication even in presence of water Extended bearing life potential in wet environments for reduced bearing costs and unanticipated downtime Effective leakage control (Mobilux EP 023)

Applications: Mobilux EP 023 is particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases on most underground mining machinery with the exception of electric motor gearings. Mobilux EP 023 can also be used in many other industrial applications where conventional gear oils cannot be retained in equipment such as gear cases, chain cases, because of leakage due to worn or missing seals.